|
|
|
|
|
Ply Bottom Board 10 frame complete
|
|
consists of a piece of waterproof structural ply large enough to give the bees a 25 mm landing board at the front, includes a pair of cypress pine cleats to go underneath and a set of 3 risers to go on top to form the entrance
|
|
|
|
|
|
|
|
Ply Bottom Board 10 frame ply only
|
|
the piece of ply that forms the bottom on the hive
|
|
|
|
|
|
|
|
Cypress Cleats 10 frame pair
|
|
approx. 7x 3.5 cm cut from good quality local cypress which is tough strong and white ant resistant
|
|
|
|
|
|
|
|
Risers 10 frame set
|
|
3 pieces pine to be nailed on top of the actual floor with the opening left in the fromt near the landing board to form the entrance
|
|
|
|
|
|
|
|
Solid Pine Bottom Board 10 frame complete
|
|
consists of 2 pieces of solid pine which fit together to form a good solid well insulated base for the hive, is long enough to provide the 25mm landing board. Comes complete with a pair of cypress cleats to go underneath and a set of risers to form the entrance on the top
|
|
|
|
|
|
|
|
Solid Pine Bottom Board 10 frame pine pieces only
|
|
the 2 pieces of solid pine which fit together to for a good solid well insulated base for the hive long enough to provide a 25mm landing board does not include either cleats or risers
|
|
|
|
|
|
|
|
Metal Bottom Board 10 frame complete
|
|
consists of a piece of galvanized iron with the sides folded over for safety and added strength which is large enough to give a 25mm landing board. Comes complete with a pair of cypress cleats to go underneath and a set of 3 risers to form the entrance on top. Metal bottom boards can be very cold in winter so are usually only used in locations where white ants are a major problem
|
|
|
|
|
|
|
|
Metal Bottom Board 10 frame metal piece only
|
|
the piece of galvanized iron with the sided folded for safety and added strength large enough to give a 25mm landing board at the front. Does not include either cleats or risers
|
|
|